2012 Ford F-450 Super Duty 6.7L Diesel Regular Cab 4×2 Service / Lube Truck
Dual rear wheel • 16,500 lb GVWR • Palfleet utility body • Mi-T-M compressor • Valley Engineering LubeMate
2012 Ford F-450 Super Duty 6.7L diesel Regular Cab 4×2 service/lube truck. Dual-rear-wheel 16,500 lb GVWR chassis with Palfleet utility body, Mi-T-M Honda-powered two-stage air compressor, and Valley Engineering LubeMate system (s/n 2012-6311) with tank, waste-oil recovery, hose reels, and work-light controls. Backup camera with in-cab monitor, rear work light, front LED, vise, and TeleSwivel hitch. Former Sunbelt Rentals field truck.
Chassis
- 2012 Ford F-450 Super Duty Regular Cab, 4×2, dual rear wheels
- VIN: 1FDUF4GT5CEC46990
- 6.7L Power Stroke V8 turbo diesel
- 16,500 lb GVWR (front 6,000 lb / rear 12,000 lb)
- 165 in wheelbase
- 225/70R19.5 commercial tires on 19.5 in steel wheels
- Built by Ford (Kentucky Truck Plant, 8/2012); body completed by Palfleet Truck Equipment, Louisville, KY (9/2012)
Service body and storage
Palfleet enclosed high-side utility / mechanic body on an F-450 Regular Cab chassis (typical ~11 ft body for this 165 in / ~84 in CA layout):
- Lockable compartments down both sides
- Tall vertical packs plus lower horizontal compartments
- Open center cargo well for bulk tools, tanks, and service equipment
- Aluminum diamond-plate rooftop toolbox
- Small lower street-side compartment with T-handle latch
- Adjustable aluminum slat shelves in the vertical compartments
- Rear workbench bumper with mounted bench vise
- Spare compartment latch hardware included in a side box
This is a full mobile-shop layout: locked storage for tools and parts, open well for dirty/heavy items, and a rear work surface.
LubeMate field-service system
Valley Engineering LubeMate — serial VE 2012-6311
www.lubemate.com • 1-800-400-0124
- Product tank circuit labeled TANK 1
- Used-oil / waste-oil capture circuit labeled WASTE, with dedicated waste hose and reel
- Air-operated pumps
- Hose reels for product, waste, and air
- Control panel: AIR, TANK 1, WASTE, COMP, START, WORK LIGHT, LIGHT, CHG
This is a jobsite PM package: dispense fresh oil/product, recover used oil, and run air tools from one truck.
Air system
- Mi-T-M two-stage gasoline air compressor
- Honda GX engine, belt-driven cast-iron pump, onboard receiver tank
- Truck-mounted in the cargo well between cab and body
- Supplies air tools and the LubeMate pneumatic pumps
Lighting, camera, and hitch
- Aftermarket backup camera with in-cab LCD monitor (sun hood)
- Rear flood / work light
- Front bumper LED scene light
- Amber cab clearance lights
- Work-light controls on the LubeMate panel
- TeleSwivel articulating combo hitch — square receiver plus pintle-style connection
- Trailer lighting plug
- Front bumper auxiliary 2-pin power connector
Who it’s built for
Mobile mechanics, equipment service techs, contractors, municipal fleets, and shops that need storage + air + used-oil recovery on one F-450 diesel chassis. Former Sunbelt Rentals field truck, set up for on-site equipment service rather than as a plain utility body.
