2012 Ford F-450 Super Duty 6.7L Diesel Regular Cab 4×2 Service / Lube Truck
Dual rear wheel • 16,500 lb GVWR • Palfleet utility body • Mi-T-M compressor • Valley Engineering LubeMate

2012 Ford F-450 Super Duty 6.7L diesel Regular Cab 4×2 service/lube truck. Dual-rear-wheel 16,500 lb GVWR chassis with Palfleet utility body, Mi-T-M Honda-powered two-stage air compressor, and Valley Engineering LubeMate system (s/n 2012-6311) with tank, waste-oil recovery, hose reels, and work-light controls. Backup camera with in-cab monitor, rear work light, front LED, vise, and TeleSwivel hitch. Former Sunbelt Rentals field truck.

Chassis

• 2012 Ford F-450 Super Duty Regular Cab, 4×2, dual rear wheels
• VIN: 1FDUF4GT5CEC46990
• 6.7L Power Stroke V8 turbo diesel
• 16,500 lb GVWR (front 6,000 lb / rear 12,000 lb)
• 165 in wheelbase
• 225/70R19.5 commercial tires on 19.5 in steel wheels
• Built by Ford (Kentucky Truck Plant, 8/2012); body completed by Palfleet Truck Equipment, Louisville, KY (9/2012)

Service body and storage

Palfleet enclosed high-side utility / mechanic body on an F-450 Regular Cab chassis (typical ~11 ft body for this 165 in / ~84 in CA layout):

• Lockable compartments down both sides
• Tall vertical packs plus lower horizontal compartments
• Open center cargo well for bulk tools, tanks, and service equipment
• Aluminum diamond-plate rooftop toolbox
• Small lower street-side compartment with T-handle latch
• Adjustable aluminum slat shelves in the vertical compartments
• Rear workbench bumper with mounted bench vise
• Spare compartment latch hardware included in a side box

This is a full mobile-shop layout: locked storage for tools and parts, open well for dirty/heavy items, and a rear work surface.

LubeMate field-service system

Valley Engineering LubeMate — serial VE 2012-6311
www.lubemate.com • 1-800-400-0124

• Product tank circuit labeled TANK 1
• Used-oil / waste-oil capture circuit labeled WASTE, with dedicated waste hose and reel
• Air-operated pumps
• Hose reels for product, waste, and air
• Control panel: AIR, TANK 1, WASTE, COMP, START, WORK LIGHT, LIGHT, CHG

This is a jobsite PM package: dispense fresh oil/product, recover used oil, and run air tools from one truck.

Air system

• Mi-T-M two-stage gasoline air compressor
• Honda GX engine, belt-driven cast-iron pump, onboard receiver tank
• Truck-mounted in the cargo well between cab and body
• Supplies air tools and the LubeMate pneumatic pumps

Lighting, camera, and hitch

• Aftermarket backup camera with in-cab LCD monitor (sun hood)
• Rear flood / work light
• Front bumper LED scene light
• Amber cab clearance lights
• Work-light controls on the LubeMate panel
• TeleSwivel articulating combo hitch — square receiver plus pintle-style connection
• Trailer lighting plug
• Front bumper auxiliary 2-pin power connector

Who it’s built for

Mobile mechanics, equipment service techs, contractors, municipal fleets, and shops that need storage + air + used-oil recovery on one F-450 diesel chassis. Former Sunbelt Rentals field truck, set up for on-site equipment service rather than as a plain utility body.